
Carrollwood Cabinet Refacing
Cabinet Refacing in Carrollwood, FL
Cabinet refacing and refinishing in Carrollwood, FL. Durable materials, honest estimates, and craftsmanship built for Florida kitchens.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Carrollwood and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Cabinet Refacing & Refinishing for Carrollwood Homes and Businesses
Is your Carrollwood kitchen stuck somewhere between "needs a refresh" and "needs a full remodel"? Cabinet refacing usually splits the difference. Carrollwood Cabinet Refacing replaces doors, drawer fronts, and exposed box surfaces while keeping your existing cabinet layout intact, which costs less and takes less time than tearing everything out.
Carrollwood's housing stock is established, and a lot of those kitchens are aging into the point where cabinets need attention but the rest of the house is fine. That's refacing territory. Refinishing is different: it strips and repaints or restains the doors you already have instead of replacing them. Carrollwood Cabinet Refacing handles both, plus full replacement when a kitchen genuinely needs new boxes, and we'll tell you plainly which one fits your situation instead of upselling the bigger job.

What we do
Cabinet Refacing services
Cabinet Refacing across Carrollwood and the surrounding area.
Residential Services

Cabinet Refacing
Cabinet refacing in Carrollwood swaps doors, drawer fronts, and box veneer for a new look without a full gut remodel. Free estimates.
Learn more →
Kitchen Cabinet Refacing
Kitchen cabinet refacing in Carrollwood updates doors, boxes, and hardware around your existing layout and appliances. Free estimates.
Learn more →
Bathroom Vanity Refacing
Bathroom vanity refacing in Carrollwood uses moisture-resistant finishes and new doors to update vanities without full replacement. Free estimates.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Carrollwood, FL with precise measuring, shaker and raised panel styles, and concealed hinge fitting. Free estimates.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Carrollwood strips or preps existing doors for a new color without full door replacement. Free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Carrollwood, FL with wood species, panel profiles, and specialty finishes built to exact measurements. Free estimates.
Learn more →
Kitchen Island Refacing
Kitchen island refacing in Carrollwood, FL matches island panels, doors, and finishes to the rest of your kitchen. Free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil and laminate peeling repair in Carrollwood fixes bubbling cabinet fronts caused by Florida humidity. Free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Carrollwood Cabinet Refacing
Craftsmanship over shortcuts
Boxes get properly prepped and sanded before anything new goes on, not just a quick coat over old finish.
Climate-aware material picks
We steer homeowners toward finishes that actually hold up against Tampa Bay humidity, not whatever's cheapest.
Written estimates, no surprises
You get a clear scope and price range before work starts, so there's no guessing on invoice day.
Clean, respectful jobsites
Dust containment and daily cleanup keep your kitchen livable while the crew works.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist visits to assess existing cabinetry and discuss style goals.
Step 2Measurement & Design
Precise measurements are taken to plan door sizes, finishes, and layout adjustments.
Step 3Material Selection
Homeowners choose from veneers, finishes, and hardware samples for their project.
Step 4Surface Preparation
Existing boxes are cleaned, sanded, and repaired to ensure a smooth refacing surface.
Step 5Refacing Installation
New veneers, doors, and panels are applied and fitted to the existing cabinet frames.
Step 6Final Walkthrough
A final inspection confirms alignment, finish quality, and functioning hardware before project closeout.
Ready to start?
Get a Free EstimateCost
Cabinet Refacing Carrollwood FL Cost
Price mostly comes down to three things: how many doors and drawer fronts you need, what material you pick, and whether hardware gets upgraded too. Island work and layout tweaks add to the number. Here's a realistic range: These are ballparks, not a quote. Contact us for a free estimate on your actual kitchen.
| Project type | Typical range | What’s included |
|---|---|---|
| Hardware-only upgrade | $600–$2,000 | new knobs, pulls, and soft-close hinges on existing doors. |
| Single room refacing | $2,500–$6,000 | new doors and veneer for a vanity or small kitchen section. |
| Full kitchen refacing | $6,000–$14,000 | complete door and box-face replacement with hardware. |
| Full kitchen plus island | $10,000–$18,000 | matching finish across all cabinetry and a separate island. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and Methods We Use
Material choice is the single biggest factor in how long a reface lasts in Florida's humidity. Here's what we work with most:

Wood Veneer Sheets
Thin wood veneers are applied over existing boxes for a refreshed natural look.

Laminate Finishes
Durable laminate options provide a cost-effective and easy-to-clean surface choice.

Solid Wood Doors
New solid wood doors replace old fronts for improved durability and appearance.

Cabinet Hardware
Knobs, pulls, and hinges are selected to match the updated cabinet style.

Soft-Close Hinges
Upgraded hinges provide quiet, smooth closing for all cabinet doors.

Protective Topcoat
A clear sealant layer protects finished surfaces from moisture and daily wear.
Questions on materials?
Get a Free EstimateTimeline
How Long Does Cabinet Refacing Take?
Most of the wait is upstream, not onsite. Doors and veneer get fabricated offsite, so the actual install days are short compared to a full remodel. You can usually keep living in your kitchen the whole time, just with some dust and a few off-limits hours per day.
- 01
Consult and measure
same day - 02
Door and finish selection
- 03
Fabrication lead time
1–2 weeks - 04
Box prep and install
2–3 days - 05
Hardware fit and final walkthrough
1 day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, Codes, and Compliance in Hillsborough County
Check with Hillsborough County before starting if your project touches anything beyond cosmetic surfaces.
| Typically needs a permit | Often no permit |
|---|---|
| Rerouting plumbing lines as part of a sink or vanity move | Replacing doors and drawer fronts on existing boxes |
| Adding or relocating electrical for under-cabinet lighting or outlets | Applying new veneer or laminate over box surfaces |
| Structural changes to cabinet framing or load-bearing walls | Swapping hardware |
| — | hinges |
| — | or soft-close mechanisms |
| — | Adding crown molding to cabinet tops |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY Cabinet Painting vs. Hiring a Refacing Pro
| DIY | Hire a pro |
|---|---|
| Fine for a small hardware swap or single cabinet touch-up | Proper adhesion requires stripping old finish and sanding to bare substrate, which most kits skip |
| Paint kits can work on doors you're willing to risk experimenting on | Door and hinge alignment needs precise measurement, not eyeballing |
| Saves money upfront on low-stakes, low-visibility areas | Box leveling matters for drawers and doors to close right long-term |
| — | Humidity in Florida kitchens exposes shortcuts fast, usually as peeling within a year |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Cabinet Refacing
Call if you're seeing any of these: Contact us for a free estimate if any of that sounds like your kitchen.
- Thermofoil or laminate peeling at the edges or corners
- Particleboard that feels swollen or soft to the touch
- Doors that won't close flush or catch on the frame
- Cabinet frames that sag or feel loose at the hinges
- A finish that's just worn out, not from damage, just age
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Carrollwood and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Lake Magdalene · Egypt Lake-Leto · Northdale · Citrus Park · Westchase · Keystone · Tampa · Cheval · Town 'n' Country · Lutz · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say

Susan M.
2 days ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the custom cabinet doors turned out better than I pictured.
Carrollwood, FL
David F.
1 week ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for soft-close hardware upgrades. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Original Carrollwood, FL

Melissa K.
3 weeks ago
5 out of 5 starsCalled Carrollwood Cabinet Refacing after a neighbor tip in Carrollwood. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our cabinet refacing.
Carrollwood Village, FL
Common questions
Cabinet Refacing FAQs
What kitchen cabinet colors will look outdated in 2026?
Color trends come and go fast, so we'd rather talk durability. A well-sealed finish in a color you actually like will outlast whatever's trending this year. Pick what suits your kitchen's light and your own taste, and make sure the finish is built to handle daily use.
What is the most expensive part of redoing a kitchen?
In a full remodel, it's usually the cabinet boxes and layout changes, plus countertops and plumbing moves. Refacing sidesteps most of that cost because the boxes stay put. Door material and hardware count are the two biggest cost drivers in a reface.
What are the steps involved in cabinet refacing?
Measure the existing boxes, pick doors and finish materials, prep the box surfaces, apply matching veneer or panels, install new doors and drawer fronts, then fit hardware and do a final walkthrough. Most kitchens move through that in a predictable sequence.
How much does Cabinet Refacing cost in Carrollwood?
It depends on door count, material choice, and hardware, but the cost section below gives realistic tiers. Call for a free estimate and we'll give you an actual number for your kitchen.
How long does Cabinet Refacing take?
A full kitchen typically runs about a week once doors arrive, with most of that lead time spent waiting on fabrication, not demolition. See the timeline section for a stage-by-stage breakdown.
Do I need a permit for Cabinet Refacing?
Cosmetic door and front swaps usually don't need one in unincorporated Hillsborough County. If plumbing, electrical, or structural work is part of the project, that triggers a permit. Check the permits section below for specifics.
Is DIY Cabinet Refacing a good idea?
For a single hardware swap, sure. For a full kitchen, DIY kits often fail at adhesion and door alignment within a year. See the DIY vs pro section for the mechanics of why.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Carrollwood.
