
Carrollwood Cabinet Refacing
Cabinet Refacing in Carrollwood, FL
Cabinet refacing in Carrollwood swaps doors, drawer fronts, and box veneer for a new look without a full gut remodel. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Carrollwood and nearby communities.
Cabinet refacing replaces what you see, the doors, drawer fronts, and exposed box surfaces, while keeping your existing cabinet layout in place. It costs a fraction of a full rip-out, and for most Carrollwood kitchens the boxes underneath are solid enough to build on.
Carrollwood Cabinet Refacing handles the measuring, the veneer matching, and the install, start to finish. If your kitchen is from the era when a lot of this neighborhood was built out, the boxes are usually fine. The finish is what gave out first.
What's included
What's Included with Cabinet Refacing
Typically included
- Removal of old doors, drawer fronts, and hinges
- Veneer or laminate application to exposed box surfaces and end panels
- New matching doors and drawer fronts sized to your openings
- Hardware installation (unless you're keeping existing pulls)
Optional
- Soft-close hinge and slide upgrades
- Crown molding added to cabinet tops
- Interior organizers or pull-out trays
Customer prep
- Empty cabinet contents before the crew arrives
- Clear counter space near the work zone
- Flag any cabinets with known water damage or soft spots
Want a clearer scope?
Get a Free EstimateHow it works
How Our Cabinet Refacing Process Works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and Methods for Cabinet Refacing
The material you pick affects how the cabinets hold up in a Florida kitchen, humidity and all. Here's what we work with most.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance. Properly sealed edges matter here, since Carrollwood's humid summers are exactly the condition that

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes. It takes a stain or clear coat well and holds up fine in air-conditioned kitchens common to this area.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term. Weak adhesion is the real reason most peeling complaints happen, not the material itsel

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCost
What Does a Cabinet Refacing Cost in Carrollwood?
Price depends mostly on door count, material choice, and whether hardware is included. Here's a realistic range. Call for a free, written estimate based on your actual door count and layout.
| Project type | Typical range | What’s included |
|---|---|---|
| Single-material refresh | $4,500–$9,000 | laminate or thermofoil doors with standard hardware. |
| Mixed-material kitchen | $8,000–$14,000 | solid wood doors on high-use cabinets, laminate elsewhere. |
| Full custom reface | $12,000–$20,000+ | custom wood doors, soft-close hardware, and molding. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Cabinet Refacing
Hillsborough County treats straightforward refacing as cosmetic work, but confirm scope with the county if your project touches plumbing or wiring.
| Typically needs a permit | Often no permit |
|---|---|
| Any electrical work tied to under-cabinet lighting changes | Door |
| Plumbing relocation if sink or dishwasher cabinets are moved | drawer front |
| Structural changes to cabinet layout or load-bearing walls | veneer replacement on existing boxes |
| — | Hardware and hinge upgrades |
| — | Cosmetic finish or color changes |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Fine for swapping a few knobs or pulls | Box prep (cleaning, sanding, leveling) determines how long the veneer bond lasts |
| Works for a single small cabinet if you're comfortable with a router | Door and hinge alignment across a full kitchen takes experience to get square |
| Risky for full kitchens: door sizing errors are expensive to fix | A pro can spot swollen particleboard before it becomes a bigger problem |
Not sure DIY vs pro?
Get a Free EstimateFAQs
Cabinet Refacing FAQs
What are the steps involved in cabinet refacing?
We assess the boxes, help you pick finishes, prep the surfaces, apply veneer, install new doors and fronts, then do a final check for alignment and function.
Can you reface cabinets that have water damage or swollen particleboard?
Minor surface damage can often be repaired before veneer goes on. Significantly swollen or soft boxes usually need box replacement in that section, which we'll flag during the assessment.
Can I change my cabinet layout during refacing?
Refacing works with your existing layout. If you want new cabinet positions, added uppers, or a different island footprint, that's closer to a partial remodel and we'll scope it separately.
Will refacing fix cabinets that are sagging or not closing right?
Sagging usually points to a hinge or frame issue, not the finish. We check hardware and frame alignment as part of the assessment and can often fix it during the reface.
How much does cabinet refacing cost per linear foot?
Most Carrollwood projects run somewhere between $100 and $250 per linear foot depending on material and hardware. A written estimate gives you the real number for your kitchen.
Before & after
Before and After Cabinet Refacing

Before 
After
Next step
Get a Cabinet Refacing Estimate in Carrollwood
Call (727) 334-0818 or request a free estimate. Home · Contact · Kitchen Cabinet Refacing
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Carrollwood updates doors, boxes, and hardware around your existing layout and appliances. Free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Carrollwood uses moisture-resistant finishes and new doors to update vanities without full replacement. Free estimates.

Cabinet Door Replacement
Cabinet door replacement in Carrollwood, FL with precise measuring, shaker and raised panel styles, and concealed hinge fitting. Free estimates.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.